Dell C1048P Port Extender Networking Command-Line Reference Guide for the C900 - Page 1426

• Any adjacency is explicitly terminated from all OSPF interfaces. • All previous passive-interface interface commands are removed from the running configuration. • All previous no passive-interface interface commands are removed from the running configuration. no passive-interface interface • Remove the interface from the passive list. • The ABR status for the router is updated. • If passive-interface default is specified, then save no passive- interface interface into the running configuration. No passive-interface default • Clear everything and revert to the default behavior. • All previously marked passive interfaces are removed. • May update ABR status. redistribute Redistribute information from another routing protocol throughout the OSPF process. C9000 Series Syntax redistribute {connected | rip | static} [metric metric-value | metric-type type-value] [route-map map-name] [tag tag-value] To disable redistribution, use the no redistribute {connected | isis | rip | static} command. Parameters connected Enter the keyword connected to specify that information from active routes on interfaces is redistributed. rip static Enter the keyword rip to specify that RIP routing information is redistributed. Enter the keyword static to specify that information from static routes is redistributed. metric metricvalue metric-type typevalue (OPTIONAL) Enter the keyword metric then a number. The range is from 0 (zero) to 16777214. (OPTIONAL) Enter the keywords metric-type then one of the following: • 1 = OSPF External type 1 • 2 = OSPF External type 2 route-map map- (OPTIONAL) Enter the keywords route-map then the name name of the route map. 1426 Open Shortest Path First (OSPFv2 and OSPFv3)