Dell C1048P Port Extender Networking Command-Line Reference Guide for the C900 - Page 574

number Enter a number of the AS. The range is 1 to 65535. Defaults Not configured. Command Modes ROUTER BGP Command History Version 9.9(0.0) 9.2(1.0) 8.2.1.0 7.4.1.0 Description Introduced on the C9010. Introduced on the Z9500. Introduced on the E-Series ExaScale. Introduced Usage Information If the number parameter is the same as the AS number used in the router bgp command, the remote AS entry in the neighbor is considered an internal BGP peer entry. This command creates a peer and the newly created peer is disabled (shutdown). Related Commands router bgp - Enter ROUTER BGP mode and configure routes in an AS. neighbor remove-private-as Remove private AS numbers from the AS-PATH of outgoing updates. C9000 Series Syntax neighbor {ipv6-address | peer-group-name} remove-private-as To return to the default, use the no neighbor {ipv6-address | peergroup-name} remove-private-as command. Parameters ipv6-address Enter the IPv6 address in the x:x:x:x::x format. NOTE: The :: notation specifies successive hexadecimal fields of zeros. peer-group-name Enter the name of the peer group to remove the private AS numbers. Defaults Disabled (that is, private AS number are not removed). Command Modes ROUTER BGPV6-ADDRESS FAMILY Command History Version Description 9.9(0.0) Introduced on the C9010. 9.2(1.0) Introduced on the Z9500. 574 Border Gateway Protocol