Dell C1048P Port Extender Networking Command-Line Reference Guide for the C900 - Page 1084

Version 9.9(0.0) 9.2(1.0) 9.2(0.0) Description Introduced on the C9010. Introduced on the Z9500. Introduced on the Z9000, S4810, and S4820T. Usage Information • Both sides of the link must specify the same transform set. • You can create up to 64 transform sets. Example Dell(conf)#int ten 0/4 Dell(conf-if-te-0/4)#ipv6 address 200:1::/64 eui64 Dell(conf)#int ten 0/6 Dell(conf-if-te-0/6)#ipv6 address 801:10::/64 eui64 crypto ipsec policy Create a crypto policy used by ipsec. C9000 Series Syntax crypto ipsec policy name seq-num ipsec-manual To delete a crypto policy entry, use the no crypto ipsec policy name seqnum ipsec-manual command. Parameters name seq-num Enter the name for the crypto policy set. Enter the sequence number assigned to the crypto policy entry. Defaults none Command Modes CONFIGURATION Command History This guide is platform-specific. For command information about other platforms, refer to the relevant Dell Networking OS Command Line Reference Guide. The following is a list of the Dell Networking OS version history for this command. Version 9.9(0.0) 9.2(1.0) 9.2(0.0) Description Introduced on the C9010. Introduced on the Z9500. Introduced on the Z9000, S4810, and S4820T. 1084 Internet Protocol Security (IPSec)