Dell C1048P Port Extender Networking Command-Line Reference Guide for the C900 - Page 1929

Parameters aes128} priv password] [access access-list-name | ipv6 accesslist-name | access-list-name ipv6 access-list-name] command. name group_name Enter the name of the user (not to exceed 20 characters), on the host that connects to the agent. Enter a text string (up to 20 characters long) as the name of the group. The following groups are created for mapping to read/write community/security-names (defaults): • v1v2creadu - maps to a community with ro permissions. • 1v2cwriteu - maps to a community rw permissions. remote ip-address Enter the keywords udp-port then the user datagram protocol (UDP) port number on the remote device. The range is from 0 to 65535. The default is 162. udp-port portnumber Enter the keywords udp-port then the UDP (User Datagram Protocol) port number on the remote device. The range is from 0 to 65535. The default is 162. 1 | 2c | 3 (OPTIONAL) Enter the security model version number (1, 2c, or 3): • 1 is the least secure version. • 3 is the most secure of the security modes. • 2c allows transmission of informs and counter 64, which allows for integers twice the width of what is normally allowed. The default is 1. encrypted auth md5 | sha auth-password priv (OPTIONAL) Enter the keyword encrypted to specify the password appear in encrypted format (a series of digits, masking the true characters of the string). (OPTIONAL) Enter the keyword auth to specify authentication of a packet without encryption. (OPTIONAL) Enter the keyword md5 or sha to designate the authentication level. • md5 - Message Digest Algorithm • sha - Secure Hash Algorithm (OPTIONAL) Enter a text string (up to 20 characters long) password that enables the agent to receive packets from the host. Minimum: eight characters long. (OPTIONAL) Enter the keywords priv to initiate a privacy authentication level setting. Simple Network Management Protocol (SNMP) and Syslog 1929