Dell C1048P Port Extender Networking Command-Line Reference Guide for the C900 - Page 584

Version 9.2(1.0) 8.2.1.0 7.4.1.0 Description Introduced on the Z9500. Introduced on the E-Series ExaScale. Introduced Usage Information The software resolves the network address configured by the network command with the routes in the main routing table to ensure that the networks are reachable via non-BGP routes and non-default routes. Related Commands redistribute - redistributes routes into BGP. network backdoor Specify this IGP route as the preferred route. C9000 Series Syntax network ipv6-address prefix-length backdoor To remove a network, use the no network ipv6-address prefix-length backdoor command. Parameters ipv6-address prefix-length Enter the IPv6 address in the x:x:x:x::x format followed by the prefix length in the /x format. The r range is /0 to /128. NOTE: The :: notation specifies successive hexadecimal fields of zeros. Defaults Not configured. Command Modes ROUTER BGPV6-ADDRESS FAMILY Command History Version Description 9.9(0.0) Introduced on the C9010. 9.2(1.0) Introduced on the Z9500. 8.2.1.0 Introduced on the E-Series ExaScale. 7.4.1.0 Introduced Usage Information Though the software does not generate a route due to backdoor config, there is an option for injecting/ sourcing a local route in presence of network backdoor config on a learned route. 584 Border Gateway Protocol