Dell C1048P Port Extender Networking Command-Line Reference Guide for the C900 - Page 1454

Related Commands Link connected to: a Stub Network (Link ID) Network/subnet number: 11.1.5.0 --More-show ip ospf database - displays OSPF database information. show ip ospf database summary Display the network summary (type 3) LSA routing information. C9000 Series Syntax Parameters show ip ospf [process-id|vrf vrf-name]database summary [linkstate-id] [adv-router ip-address] process-id vrf vrf-name link-state-id Enter the OSPF Process ID to show a specific process. If no Process ID is entered, command applies only to the first OSPF process. Enter the keyword vrf and the name of the VRF to view LSA routing information corresponding to the OSPF process that is tied to a specific VRF. (OPTIONAL) Specify LSA ID in dotted decimal format. The LSA ID value depends on the LSA type, and it can be one of the following: • the network's IP address for Type 3 LSAs or Type 5 LSAs • the router's OSPF router ID for Type 1 LSAs or Type 4 LSAs • the default destination (0.0.0.0) for Type 5 LSAs adv-router ipaddress (OPTIONAL) Enter the keywords adv-router then the IP address of an Advertising Router to display only the LSA information about that router. Command Modes • EXEC • EXEC Privilege Command History This guide is platform-specific. For command information about other platforms, see the relevant Dell Networking OS Command Line Reference Guide. The following is a list of the Dell Networking OS version history for this command. Version 9.9(0.0) 9.4(0.0) Description Introduced on the C9010. Added support for VRF on all platforms (Except MXL and STOMP). 1454 Open Shortest Path First (OSPFv2 and OSPFv3)