Dell C1048P Port Extender Networking Command-Line Reference Guide for the C900 - Page 756

debug ip dhcp client packets Activate the debugging and display of log messages for DHCP packets sent and received on DHCP client interfaces. C9000 Series Syntax Parameters debug ip dhcp client packets [interface type slot/port] interface typeslot/ port Enter the keyword interface with the interface type and slot/port information to display DHCP log messages for a specified interface. The valid interface types are: • For a 10-Gigabit Ethernet interface, enter the keyword tengigabitethernet. • For a 40-Gigabit Ethernet interface, enter the keyword fortyGigE. Defaults none Command Modes EXEC Privilege Command History Version 9.9(0.0) 9.2(1.0) 8.3.19.0 8.3.11.1 8.3.7.0 8.2.1.0 Description Introduced on the C9010. Introduced on the Z9500. Introduced on the S4820T. Introduced on the Z9000. Introduced on the S4810. Introduced on the C-Series and S-Series. Example Dell# debug ip dhcp client packets Dell(conf)#do show debugging Dhcp Client : DhcpClient Packet debugging is on for fortyGigE 2/0 Dell(conf-if-fo-2/0)#ip address dhcp Dell(conf-if-fo-2/0)#no ip address dhcp Dell(conf-if-fo-2/0)#do show logging Syslog logging: enabled Console logging: level debugging Monitor logging: level debugging Buffer logging: level debugging, 5 Messages Logged, Size (40960 bytes) Trap logging: level informational Logging to 10.10.10.4 Logging to 10.1.2.4 Logging to 172.31.1.4 Logging to 133.33.33.4 Logging to 172.16.1.162 756 Dynamic Host Configuration Protocol (DHCP)