HP StorageWorks 2/16V Brocade Fabric Manager Administrator's Guide (53-1000019 - Page 165

Enabling or Disabling Call Home Globally 10 To add switches to an existing call home configuration 1. In the View panel, select the switches you want to add to a call home configuration. 2. Click Tasks > Call Home > Add switches to existing configuration. The Call Home dialog box displays, as shown in Figure 10-3. 3. Select the call home configuration to which you want to add the selected switches. 4. Click Add Switches. Figure 10-3 Adding Switches to a Call Home Configuration Enabling or Disabling Call Home Globally When you set up a call home configuration, it does not take effect unless you enable call home. When you enable call home, then all of the call home configurations that you set up are enabled. You cannot enable or disable individual call home configurations. To enable or disable call home globally 1. Click Tasks > Call Home > Create new configuration. The Call Home dialog displays (see Figure 10-1 on page 10-3). 2. Click Enable or Disable. 3. Click OK to commit the change and close the Call Home dialog. Fabric Manager Administrator's Guide Publication Number: 53-1000196-01-HP 10-5