HP StorageWorks 2/16V Brocade Fabric Manager Administrator's Guide (53-1000019 - Page 327

Changing Secure Communication Settings (HTTP or HTTPS) 24 If a fabric contains some switches running Fabric OS versions that do not support HTTPS, then southbound operations to those switches will fail. Note If HTTP is turned off, all client-initiated HTTP operations stop working. These operations include FICON/CUP features (including PDCM matrix) and switch and port control operations (such as enable, disable, and reboot). Figure 24-8 Server Management Console, Security Tab In the Security tab, the current running configuration is displayed; however, because this tab does not automatically refresh, the running configuration that is displayed might be out-of-date. Click Reset to update the running configuration. Clicking Reset also restores the values in the dialog box to the values specified by the last Apply command or, if you have not activated Apply, to the values in effect when the dialog box was opened. To change the connection settings 1. Launch the Server Management Console. 2. Click the Security tab. 3. Select the connection method by clicking the appropriate radio button: • Connect using HTTP (default) • Connect using HTTPS (HTTP over SSL) only 4. Replace the port number in the Port field if you need to use a different port number than the default. Fabric Manager Administrator's Guide Publication Number: 53-1000196-01-HP 24-9