HP StorageWorks 2/16V Brocade Fabric Manager Administrator's Guide (53-1000019 - Page 210

14 Determining Availability of Firmware-Specific Features Table 14-1 Firmware-Specific Features (Continued) Feature Fabric OS XPath OS 5.2.x 5.1.x 5.0.x 4.4.x 4.2.x 4.1.x 4.0.x 3.1.x 3.0.x 2.6.x 7.3.x 7.1.x FTP server and firmware repository XXXXXXXXX X FICON XXX X X FICON-CUP XXXX Cascaded FICON3 X Performance Monitoring (port X X X X X4 statistics) Performance Monitoring (end- X X X X X4 to-end)5 QuickLoop6 X X XX XX X Fibre Channel Router XX X FCIP XX Change Management configuration checking7 X X supportShow information in XXX X X X X X Fabric Manager supportSave information in X Fabric Manager Replicate authentication, XXXX authorization, and accounting (AAA) configuration Role-based access control X (RBAC) Administrative Domains Offline zone management8 X XXXX iSCSI management X ACL management X Trace Route9 X 1. XPath OS v7.1.2c and higher is required for LSAN view support. 2. Topology/ISL monitoring is supported on Fabric OS v2.6.0k or higher and Fabric OS v3.0.2k or higher. 3. All switches in the fabric must be running Fabric OS v5.2.0 or higher 4. Performance Monitoring port statistics return incorrect values for Fabric OS v4.x to 4.2.0b. Firmware versions v4.2.0c or higher work correctly. 5. The seed switch must be running Fabric OS v3.x/4.x or higher for End-to-End Performance Monitoring to be enabled. 6. The QuickLoop feature can be implemented only on switches running Fabric OS v2.x/3.x; however, when using a seed switch running Fabric OS v4.x, you can see the Fabric OS v2.x/3.x switches in QuickLoops. 14-2 Fabric Manager Administrator's Guide Publication Number: 53-1000196-01-HP