Dell Brocade 6520 Command Reference Supporting Fabric OS v7.1.0 - Page 1004

2 spinFab DIAGNOSTICS -nframes count -pattern name -timeout count Determines how many frames will be sent by spinfab on the link to spin. Default is 2. The maximum number is 5. If you want to configure more than 5 use -nframes 0. Forces spinfab to use a particular data pattern for the frames it spins between ports. The pattern can be a user defined pattern or is selected from a set of twenty five predefined pattern types. Use the datatypeshow command to view the predefined patterns supported with spinfab. For each pattern, the datatypeshow command displays the name, the pattern type number, and an example. Specify the pattern by its name after the -pattern option. If pattern is not specified, it defaults to jCRPAT (type=17). To use a user defined pattern, follow the -pattern option with a 32 bit hexadecimal number. Defines a time limit (in seconds) for the running of spinfab. Spinfab will keep track of how long the test has run and stop testing once the timeout limit has been reached. The overall accuracy will be in the tens of seconds. When it detects failures, the test may report one or more of the following error messages. If errors persist, contact Technical Support. DATA ERR_STAT ERR_STATS ERR_STATS_2LONG ERR_STATS_BADEOF ERR_STATS_BADOS ERR_STATS_C3DISC ERR_STATS_CRC ERR_STATS_ENCIN ERR_STATS_ENCOUT ERR_STATS_TRUNC ERR_STAT_2LONG ERR_STAT_BADEOF ERR_STAT_BADOS ERR_STAT_C3DISC ERR_STAT_CRC ERR_STAT_ENCIN ERR_STAT_ENCOUT ERR_STAT_TRUNC FINISH_MSG_ERR INIT MBUF_STATE_ERR NO_SEGMENT PORT_ABSENT PORT_DIED PORT_ENABLE PORT_M2M PORT_STOPPED PORT_WRONG RXQ_RAM_PERR STATS STATS_C3FRX STATS_FRX STATS_FTX TIMEOUT XMIT 976 Fabric OS Command Reference 53-1002746-01