Dell Brocade 6520 Command Reference Supporting Fabric OS v7.1.0 - Page 676
delete, 192.168.50.61 192.168.51.68 -b 30 -B 50
View all Dell Brocade 6520 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 676 highlights
2 portCfg EXAMPLES delete Deletes a management route for a specified destination IP Address. The following operands are required. dest_IPv4_addr Specifies the destination IP address for the management route in IPv4 format. netmask Specifies the subnet mask for the IPv4 address in a.b.c.d format. To create a FICON-enabled tunnel, first create an empty FCIP tunnel without any circuits: switch:admin> portcfg fciptunnel 1/12 create Operation succeeded To enable FICON and compression on the tunnel (this sets the keepalive timeout value to 1000 ms, which is the default for DFICON-enabled tunnels): switch:admin> portcfg fciptunnel 1/12 modify -c 1 -F 1 Operation succeeded To create two circuits (circuit 0 and circuit 1) on the tunnel (these circuits will be created with the FICON-compatible keepalive timeout value): switch:admin> portcfg fcipcircuit 1/12 create \ 0 192.168.51.61 192.168.50.68 -b 300000 -B 500000 Operation succeeded switch:admin> portcfg fcipcircuit 1/12 create 1 192.168.50.61 192.168.51.68 -b 300000 -B 500000 Operation succeeded To display circuit 1: switch:admin> portshow fcipcircuit 1/12 1 Circuit ID: 1/12.1 Circuit Num: 1 Admin Status: Enabled Oper Status: In Progress Remote IP: 192.168.51.61 Local IP: 192.168.51.68 Metric: 0 Min Comm Rt: 300000 Max Comm Rt: 500000 SACK: On Min Retrans Time: 100 Max Retransmits: 8 Keepalive Timeout: 1000 Path MTU Disc: 0 VLAN ID: (Not Configured) L2CoS: (VLAN Not Configured) DSCP: F: 0 H: 0 M: 0 L: 0 Flags: 0x00000000 To set the compression rate to 'moderate' on the tunnel: switch:admin> portcfg fciptunnel 1/12 modify -c 2 Operation succeeded 648 Fabric OS Command Reference 53-1002746-01