Dell Brocade 6520 Command Reference Supporting Fabric OS v7.1.0 - Page 1108

2 uRouteShow NOTES OPERANDS EXAMPLES SEE ALSO The execution of this command is subject to Virtual Fabric or Admin Domain restrictions that may be in place. Refer to Chapter 1, "Using Fabric OS Commands" and Appendix A, "Command Availability" for details. This command has the following operands: slot For bladed systems only, specify the slot number of the input port whose routes are displayed, followed by a slash (/). port Specify the number of the input port whose routes are to be displayed, relative to its slot for bladed systems. Use switchShow to display a list of valid ports. This operand is optional; if omitted, the command displays routing information for all input ports in the switch. domain Specify a remote domain in the fabric for which routing information is to be displayed. This operand is optional; if omitted, the routing information for all domains in the fabric is displayed. To display the routing information of all the active ports: switch:admin> urouteshow Local Domain ID: 3 In Port Domain Out Port Metric Hops Flags Next (Dom, Port) 0 1 11 1000 1 D 1,0 Type to continue, Q to stop: 11 2 0 1500 2 D 4,0 Type to continue, Q to stop: 4 0 500 1 D 4,0 16 1 27 1000 1 D 1,1 Type to continue, Q to stop: 27 2 16 1500 2 D 4,16 To display the routing information of port 11 to domain 4 only: switch:admin> urouteshow 1/11, 4 Local Domain ID: 3 In Port Domain Out Port Metric Hops Flags Next (Dom, Port) 11 4 16 500 1 D 4,16 portRouteShow, topologyShow 1080 Fabric OS Command Reference 53-1002746-01