Dell Brocade 6520 Command Reference Supporting Fabric OS v7.1.0 - Page 923

secAuthSecret 2 secAuthSecret Manages the DH-CHAP shared secret key information. SYNOPSIS secauthsecret --show secauthsecret --set secauthsecret --remove value | --all DESCRIPTION NOTES OPERANDS EXAMPLES Use this command to manage the DH-CHAP shared secret key database used for authentication. This command displays, sets, and removes shared secret key information from the database or deletes the entire database. If you are performing set or remove operations, when the command is completed new data is saved persistently. New data is effective with the next authentication request. The configuration applies to a switch instance only. Port level authentication security must be enabled before encryption configuration can be enabled. Pre-shared secret keys should be configured on both ends of the ISL to perform authentication. For encrypted ports, an authentication key of 32 characters is recommended. Spaces are not allowed. The execution of this command is subject to Virtual Fabric or Admin Domain restrictions that may be in place. Refer to Chapter 1, "Using Fabric OS Commands" and Appendix A, "Command Availability" for details. This command has the following operands: --show Lists the WWNs for which a shared secret is configured. In Access Gateway mode, since you cannot configure using domain ID or switchname, these fields will be displayed as -1 and Unknown respecitively. --set Sets shared secrets. You can set shared secrets for F_Port, N_Port in Access Gateway mode and E, EX_Port and F_Port on Fabric OS. This command is interactive. In Access Gateway mode, you can specify only a WWN. In Fabric OS, you can specify a WWN or switchname or domain ID. Spaces are not allowed. --remove [wwn | domain | swname] Removes the specified WWN entry from the database. If a domain name is specified, it is converted to a WWN and then the entry is removed. If no option is specified, the command is interactive. In Access Gateway mode, you can specify only a WWN. In Fabric OS, you can specify a WWN or switchname or domain ID. --remove --all Deletes the entire secret key database. To list the shared secret WWN: switch:admin> secauthsecret --show WWN DId Name 10:00:00:60:69:80:5b:e8 1 switch Fabric OS Command Reference 895 53-1002746-01