Dell Brocade 6520 Command Reference Supporting Fabric OS v7.1.0 - Page 1109

usbStorage 2 usbStorage Manages data files on an attached USB storage device. SYNOPSIS usbstorage [-e | --enable] usbstorage [-d | --disable] usbstorage [-l | --list] usbstorage [-r | --remove area target] usbstorage [-h | --help] DESCRIPTION NOTES OPERANDS EXAMPLES Use this command to control a USB device attached to the Active CP. When the USB device is enabled, other applications, such as supportSave, firmwareDownload, or configDownload/cfgUpload can conveniently store and retrieve data from the attached storage device. Refer to the help pages for these commands for specific information on how the USB device is accessed by each application. The execution of this command is subject to Virtual Fabric or Admin Domain restrictions that may be in place. Refer to Chapter 1, "Using Fabric OS Commands" and Appendix A, "Command Availability" for details. This command is available only on the Active CP. This command has the following operands: -e | --enable Enables the USB device. The USB device must be enabled before the list and remove functions are available. -d | --disable Disables an enabled USB device. This command prevents access to the device until it is enabled again. -r | --remove area target Removes a target in a specified application storage area. Valid areas are: firmware, support, config, or firmwarekey. A specified area must be followed by a target. Any existing file in a given application directory can be specified as a target. This command removes all data associated with the specified target. -l | --list Lists the content of the USB device up to two levels down from the root directory. -h | --help Displays the command usage. To enable an attached USB device: switch:admin> usbstorage -e USB storage enabled Fabric OS Command Reference 53-1002746-01 1081