Dell Brocade 6520 Command Reference Supporting Fabric OS v7.1.0 - Page 1025

supportShowCfgEnable 2 supportShowCfgEnable Enables a group of commands to be displayed under the supportShow command. SYNOPSIS supportshowcfgenable os | exception | port | fabric | services | security | network | portlog | system | extend | filter | perfmon | ficon | iswitch | asic_db | ag | dce_hsl |crypto | fcip DESCRIPTION NOTES OPERANDS Use this command to enable a group of commands to be displayed under the supportShow command. Use the supportShowCfgDisable command to disable groups of commands. The FCIP commands are supported only on the Brocade 7800/FX8-24 platforms and cannot be configured to collect data on unsupported platforms. The execution of this command is subject to Virtual Fabric or Admin Domain restrictions that may be in place. Refer to Chapter 1, "Using Fabric OS Commands" and Appendix A, "Command Availability" for details. This command has the following operands: os Enables the OS group commands. exception Enables the exception group commands. port Enables the port group commands. fabric Enables the fabric group commands. services Enables the service group commands. security Enables the security group commands. network Enables the network group commands. portlog Enables the portlog group commands. system Enables the system group commands. extend Enables the extend group commands. filter Enables the filter group commands. perfmon Enables the Performance Monitor group commands. ficon Enables the FICON group commands. iswitch Enables the FC Router group commands. Fabric OS Command Reference 997 53-1002746-01