Dell Brocade 6520 Command Reference Supporting Fabric OS v7.1.0 - Page 677
portcfg fcipcircuit 16 create 1
View all Dell Brocade 6520 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 677 highlights
portCfg 2 To enable FICON XRC and Teradata emulation on the tunnel: switch:admin> portcfg fciptunnel 1/12 modify \ --ficon-xrc 1 --ficon-tera-read 1 --ficon-tera-write 1 Operation succeeded To enable printer emulation on the tunnel: switch:admin> portcfg fciptunnel 1/12 modify \ --ficon-print 1 Operation succeeded To configure FCIP FastWrite and Tape Pipelining on the tunnel: switch:admin> portcfg fciptunnel 1/12 modify -f 1 -t 1 Operation succeeded To delete circuit 1: switch:admin> portcfg fcipcircuit 1/12 delete 1 Operation succeeded To create a tunnel with VLAN tagging: 1. Create a tunnel with VLAN tagging set. switch:admin> portcfg fciptunnel 16 create \ 192.168.2.20 192.168.2.10 2500000 -v 100 Operation Succeeded 2. Create a circuit with VLAN tagging set. switch:admin> portcfg fcipcircuit 16 create 1 \ 192.168.2.21 192.168.2.11 2500000 -v 200 Operation Succeeded 3. Modify an existing circuit to change the VLAN tag and L2 CoS levels. switch:admin> portcfg fcipcircuit 16 modify \ 0 -v 300 --l2cos-f 7 --l2cos-h 5 \ --l2cos-m 3 --l2cos-l 1 !!!! WARNING !!!! Modify operation can disrupt the traffic on the fcipcircuit specified for a brief period of time. This operation will bring the existing circuit down (if circuit is up) before applying new configuration. Continue with Modification (Y,y,N,n): [ n] y Operation Succeeded 4. Modify existing circuit to change DSCP marking values switch:admin> portcfg fcipcircuit 16 modify 0 \ --dscp-f 32 --dscp-h 16 --dscp-m 8 --dscp-l 4 Operation Succeeded 5. Display the tunnel configuration and circuit values. switch:admin> portshow fciptunnel 16 -c Tunnel ID: 16 Tunnel Description: Admin Status: Enabled Fabric OS Command Reference 649 53-1002746-01