Dell Brocade 6520 Command Reference Supporting Fabric OS v7.1.0 - Page 721

portCfgNPIVPort 2 NOTES OPERANDS EXAMPLES The execution of this command is subject to Virtual Fabric or Admin Domain restrictions that may be in place. Refer to Chapter 1, "Using Fabric OS Commands" and Appendix A, "Command Availability" for details. When using portCfgNPIVPort --disable or --enable on trunked ports, you must disable all trunk member ports before changing the NPIV capability on a trunk member and then re-enable the trunked ports to ensure that the configuration changes take effect. Use the portCfgShow command to determine whether NPIV is enabled on a port and to display the maximum logins configured for that port. Use the portCfgDefault command to reset all port configurations, including the NPIV configuration of a port. This command has the following operands: slot For bladed systems only, specifies the slot number of the port to be configured, followed by a slash (/). port Specifies the number of the port to be configured, relative to its slot for bladed systems. Use switchShow for a listing of valid ports. --enable Enables NPIV on the specified port. This command can be executed only in switch mode. --disable Disables NPIV on the specified port. This command can be executed only in switch mode. --setloginlimit login_limit Sets the maximum number of allowed logins for the specified port. This command can be executed both in switch mode and Access Gateway mode. Valid values for login_limit are 0 to 255. The default value is 126. --help Displays the command usage. mode Enables or disables NPIV on the specified port. Specify 1 to enable or 0 to disable the feature. The mode operand is a legacy command; it will be deprecated in a future Fabric OS release. To display the current NPIV port configuration: switch:admin> portcfgshow Ports of Slot 0 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 Speed AN AN AN AN AN AN AN AN AN AN AN AN AN AN AN AN Fill Word(On Active)0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 Fill Word(Current) 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 Fil 0 0 0 0 0 0 0 0 0 0 0 0 0 0 AL_PA Offset 13 Trunk Port ON ON ON ON ON ON ON ON ON ON ON ON ON ON ON ON Long Distance VC Link Init Locked L_Port Locked G_Port Disabled E_Port Locked E_Port ISL R_RDY Mode RSCN Suppressed Fabric OS Command Reference 693 53-1002746-01