Dell Brocade 6520 Command Reference Supporting Fabric OS v7.1.0 - Page 571

msPlMgmtActivate 2 msPlMgmtActivate Activates the Management Server (MS) platform service. SYNOPSIS msplmgmtactivate DESCRIPTION NOTES OPERANDS EXAMPLES SEE ALSO Use this command to activate the MS platform service throughout the fabric. This command attempts to activate the MS platform service for each switch in the fabric. The change takes effect immediately and is committed to the configuration database of each affected switch. MS activation is persistent across power cycles and reboots. By default, the MS platform service is disabled. Before issuing this command, run msCapabilityShow to verify that all switches in the fabric support the MS platform service; if one switch does not support the service, the command fails. When an FCS policy is enabled, this command can be issued only from the primary FCS switch. The execution of this command is subject to Virtual Fabric or Admin Domain restrictions that may be in place. Refer to Chapter 1, "Using Fabric OS Commands" and Appendix A, "Command Availability" for details. This command is supported only in AD0 and AD255 contexts. None To activate the MS platform service: switch:admin> msplmgmtactivate Request to activate MS Platform Service in progress...... *Completed activating MS Platform Service in the fabric! msCapabilityShow, msPlatShow, msPlClearDB, msPlMgmtDeactivate Fabric OS Command Reference 543 53-1002746-01