Dell Brocade 6520 Command Reference Supporting Fabric OS v7.1.0 - Page 747

portCfgSpeed 2 EXAMPLES -x [hex1 [-hex2]] -slot [slot1[-slot2] speed 0 ax s 1 2 4 8 10 16 -h Configures a port or a range of ports identified by port numbers, index number in hexadecimal format. You may specify multiple port ranges separated by a space, for example, -x 21-26 28-3c. Configures all ports on a slot or on a range of slots, for example, -s 3-5. You may specify multiple slot ranges separated by a space, for example, -s 3-5 8-10. Sets speed for the specified ports. This operand is required. Valid values are one of the following. Autosensing mode (hardware). The port automatically configures for maximum speed. Autosensing mode (hardware). The port automatically configures for maximum speed with enhanced retries. Auto-sensing mode (software). The port automatically configures for maximum speed with enhanced retries. The port is set at a fixed speed of 1 Gbps (not supported on 10G and 16G platforms). The port is set at a fixed speed of 2 Gbps. The port is set at a fixed speed of 4 Gbps. The port is set at a fixed speed of 8 Gbps. The port is set at a fixed speed of 10 Gbps (not supported on 8G platforms). The port is set at a fixed speed of 16 Gbps (not supported on 8G platforms). Displays the command usage. To set the speed of a port to 10 Gbps: switch:admin> portcfgspeed 2/3 10 To set the speed of a port using the port index: switch:admin> portcfgspeed -i 78 16 To set the speed of a port range using the port index: switch:admin> portcfgspeed -i 24-38 8 To set all ports on slots 2 and 3 to 8 Gbps: switch:admin> portcfgspeed -s 2-3 8 To set all ports on slots 2-3 and 9-12 to 10 Gbps: switch:admin> portcfgspeed -s 2-3 9-12 10 Fabric OS Command Reference 719 53-1002746-01