Dell Brocade 6520 Command Reference Supporting Fabric OS v7.1.0 - Page 442

2 fwFruCfg fwFruCfg Displays or modifies FRU state alert configuration. SYNOPSIS fwfrucfg [--show] DESCRIPTION NOTES OPERANDS EXAMPLES Use this command to configure states and actions for field-replaceable units (FRUs) and small form-factor pluggables (SFPs). Based on these configuration settings, Fabric Watch generates actions when a FRU or SFP state changes. For SFPs, Fabric Watch monitors state changes in following events: SFP inserted, SPP removed, SFP faulty. When used without operand, this command interactively prompts for user input. To configure email alerts, use fwMailCfg. This command is not applicable to platforms that do not support FRUs or SFPs. This command requires a Fabric Watch license. The OFF state (8) is only applicable to FANs on the Brocade DCX and DCX-4S chassis and on the Brocade 5300 switch. The execution of this command is subject to Virtual Fabric or Admin Domain restrictions that may be in place. Refer to Chapter 1, "Using Fabric OS Commands" and Appendix A, "Command Availability" for details. This command has the following operand: --show Displays the current FRU configuration setting. This operand is optional; if omitted, the configuration prompt displays. To change the FRU state alert configuration: switch:admin> fwfrucfg The current FRU configuration: Alarm State Alarm Action Slot 1 1 Power Supply 1 1 Fan 1 1 WWN 1 1 SFP 0 0 Note that the value 0 for a parameter means that it is NOT used in the calculation Configurable Alarm States are: Absent-1, Inserted-2, On-4, Off-8, Faulty-16 Configurable Alarm Actions are: Errlog-1, E-mail-16 Slot Alarm State: (0..31) [1] Slot Alarm Action: (0..17) [1] Power Supply Alarm State: (0..31) [1] Power Supply Alarm Action: (0..17) [1] Fan Alarm State: (0..31) [1] Fan Alarm Action: (0..17) [1] 414 Fabric OS Command Reference 53-1002746-01