Dell Brocade 6520 Command Reference Supporting Fabric OS v7.1.0 - Page 445

fwMailCfg 2 fwMailCfg Displays and configures Fabric Watch email alerts. SYNOPSIS fwmailcfg DESCRIPTION NOTES OPERANDS EXAMPLES Use this command to display or modify the configuration and status of the Fabric Watch email alert on the switch. Switch elements monitored by Fabric Watch are divided into classes, and e-mail alerts are based on the classes. Each class can configure up to five e-mail addresses as the alert message's receiver. Multiple e-mail addresses must be separated by a comma. The e-mail addresses must conform to standard syntax [email protected]. Default domains are not automatically appended. Invalid e-mail addresses are rejected. "NONE" is the default address and a valid input parameter. In Access Gateway mode, only the following classes are supported. • Environment class • SFP class • Port class • F/FL Port (Optical) class • F/FL Port (Copper) class (embedded platforms only) • Resource class For an e-mail alert to function correctly, add the CP0 and CP1 IP addresses and host names to DNS and also set the domain name and name server. The ipAddrShow and dnsConfig commands can be used to set and verify this information. This command requires a Fabric Watch license. The execution of this command is subject to Virtual Fabric or Admin Domain restrictions that may be in place. Refer to Chapter 1, "Using Fabric OS Commands" and Appendix A, "Command Availability" for details. None To configure email settings: switch:admin> fwmailcfg 1 : Show Mail Configuration Information 2 : Disable Email Alert 3 : Enable Email Alert 4 : Send Test Mail 5 : Set Recipient Mail Address for Email Alert 6 : Relay Host IP Configuration 7 : Quit Select an item => : (1..7) [7]1 Config Show Menu 1 : Environment class 2 : SFP class 3 : Port class 4 : Fabric class 5 : E-Port class 6 : F/FL Port (Optical) class 7 : Alpa Performance Monitor class 8 : End-to-End Performance Monitor class Fabric OS Command Reference 417 53-1002746-01