Dell Brocade 6520 Command Reference Supporting Fabric OS v7.1.0 - Page 628

2 perfDelEEMonitor perfDelEEMonitor Deletes one or all end-to-end performance monitors from a port. SYNOPSIS perfdeleemonitor [slot/]port [monitorId] DESCRIPTION NOTES OPERANDS EXAMPLES SEE ALSO Use this command to delete an end-to-end performance monitor from a port, or all such monitors associated with a port. This command requires an Advanced Performance Monitoring license. This command is not supported on virtual FC ports (VE/VEX_Port), EX_Port, M (Mirror) ports and GbE ports. The execution of this command is subject to Virtual Fabric or Admin Domain restrictions that may be in place. Refer to Chapter 1, "Using Fabric OS Commands" and Appendix A, "Command Availability" for details. This command has the following operands: slot For bladed systems only, specifies the slot number of the port on which to delete the monitor, followed by a slash (/). port Specifies the number of the port on which the monitor is to be deleted, relative to its slot for bladed systems. Use switchShow for a list of valid ports. monitorId Specifies the numeric key of the monitor to be deleted. The key is defined when a monitor is created. Use perfMonitorShow to determine the monitor key. This operand is optional. If no operand is specified, this command deletes all end-to-end monitors associated with the port. To delete an end-to-end monitor on a port, or all such monitors: switch:admin> perfdeleemonitor 7/2 5 End-to-End monitor number 5 deleted switch:admin> perfdeleemonitor 7/2 This will remove ALL EE monitors on port 2, \ continue? (yes, y, no, n): [no] y perfAddEEMonitor, perfMonitorShow 600 Fabric OS Command Reference 53-1002746-01