Dell Brocade 6520 Command Reference Supporting Fabric OS v7.1.0 - Page 1040

2 switchShow 10G N10 16G N16 AN UN State No_Card No_Module Mod_Val Mod_Inv No_Light No_SigDet No_Sync In_Sync Laser_Flt Port_Flt Diag_Flt Lock_Ref Testing Offline 10 Gbps fixed transfer speed 10 Gbps negotiated transfer speed 16 Gbps fixed transfer speed 10 Gbps negotiated transfer speed Autonegotiating Unknown Port state information. Valid states include the following: No interface card present. No module (GBIC or other) present. Module validation in process. Module speed mismatch or incompatible SFP. The module is not receiving light. This state is not applicable to Condor 3-based interchassis link (ICL) ports. No signal is detected on the port. For Condor 3-based interchassis link (ICL) ports, this state replaces the No_Light indicator. It indicates that a quad small form-factor pluggable (QSFP) has been installed but is not connected with a cable. The module is receiving light but is out of sync. The module is receiving light and in sync. The module is signaling a laser fault. The port is marked faulty. The port failed diagnostics. The port is locking to the reference signal. The port is running diagnostics. A port connection is not established (for virtual ports only). 1012 Fabric OS Command Reference 53-1002746-01