Dell Brocade 6520 Command Reference Supporting Fabric OS v7.1.0 - Page 1089

traceDump 2 traceDump Initiates, or removes a trace dump or displays the trace dump status. SYNOPSIS tracedump [-S] tracedump -n [-s slot] tracedump -r [-s slot] | -R tracedump -c [-s slot] DESCRIPTION NOTES OPERANDS Use this command to initiate a background trace dump, to remove the content of a trace dump, or to display the dump status on the switch. When executed without operands, this command defaults to traceDump -S. Execution of traceDump -n generates a local trace dump locally. Use supportSave to transfer the local trace dump to a remote host. When supportSave is used, the default remote file name format for the trace dump file is as follows: chassisname-S#xxs-YYYYMMDDHHMMSS.type_[new | old].dmp.gz S# Indicates the slot number (0 on standalone platforms) xxs Indicates the processor. Values are cp0, cp1, bp0, bp1, dp0, or dp1. YYYYMMDDHHMMSS Indicates the trace dump time stamp (year-month-day-hour-minute-second). type Indicates the tracedump type. Valid types include BTRACE, DTRACE, and CTRACE. new | old Indicates a new or an old trace dump file. dmp.gz The compressed trace dump archive file extension. For example, the filename for a a new BFOS tracedump received from slot 10 on chassisABC would be chassisABC-S10bp-201103031111.BTRACE_NEW.dmp.gz. The execution of this command is subject to Virtual Fabric or Admin Domain restrictions that may be in place. Refer to Chapter 1, "Using Fabric OS Commands" and Appendix A, "Command Availability" for details. This command has the following mutually exclusive operands: -S Displays the trace dump status This operand is optional. If omitted, the same status information is displayed. -n Initiates a background trace dump. -r Clears the status of a particular trace dump on a specified slot. Fabric OS Command Reference 53-1002746-01 1061