Dell Brocade 6520 Command Reference Supporting Fabric OS v7.1.0 - Page 977

shellFlowControlDisable 2 shellFlowControlDisable Disables XON/XOFF flow control on the console serial port. SYNOPSIS shellflowcontroldisable DESCRIPTION NOTES OPERANDS EXAMPLES SEE ALSO Use this command to disable XON/XOFF flow control on the console serial port. Flow control is disabled by default. Because this command changes the flow control on the console serial port, it must be executed from a session that is logged in from the console serial port. This command cannot run from a Telnet session. This setting is saved in the configuration database; therefore, it is persistent across reboots and power cycles. On dual-CP systems, a reboot on the standby CP is required for this command to take effect. No action is required on the active CP. The execution of this command is subject to Virtual Fabric or Admin Domain restrictions that may be in place. Refer to Chapter 1, "Using Fabric OS Commands" and Appendix A, "Command Availability" for details. None To disable flow control: switch:admin> shellflowcontroldisable Disabling flowcontrol flow control is now disabled shellFlowControlEnable Fabric OS Command Reference 949 53-1002746-01