Dell Brocade 6520 Command Reference Supporting Fabric OS v7.1.0 - Page 825
FUNCTION, SYNOPSIS, DESCRIPTION, NOTES, OPERANDS, portshow vlantag
View all Dell Brocade 6520 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 825 highlights
portShow 2 FUNCTION SYNOPSIS To display an FCoE port: switch:admin> portshow 8 portIndex: 8 portName: portHealth: HEALTHY Authentication: None portDisableReason: None portCFlags: 0x1 portFlags: 0x2cb03 PRESENT ACTIVE F_PORT G_PORT U_PORT\ LOGICAL_ONLINE LOGIN NOELP LED NSREG ACCEPT FLOGI portType: 17.0 POD Port: Port is licensed portState: 1 Online Protocol: FCoE portPhys: 6 In_Sync portScn: 32 F_Port port generation number: 0 state transition count: 1 portId: 850800 portIfId: 43020028 portWwn: 20:08:00:05:1e:76:60:80 portWwn of device(s) connected: Distance: normal portSpeed: 10Gbps Display IP Interface configurations on the Brocade 7800/FX8-24 platforms portshow option [slot/]ge_port [optional_args] DESCRIPTION NOTES OPERANDS Use this command to display FCIP-related configuration parameters on the Brocade 7800 switch and on the Brocade FX8-24 blade. The parameters displayed by this command are set with the portCfg command. The following displays are supported with this command: • portshow ipif - Displays the local IP interfaces. • portshow iproute - Displays static routes on the IP interface. • portshow arp - Displays the content of the address resolution protocol (ARP) table. • portshow vlantag - Displays the IP interface VLAN configuration. • portshow autoneg - Displays autonegotiation status. IPv6 addresses are supported. This command has the following operands: slot For bladed systems only, specifies the slot number of the port to be displayed, followed by a slash (/). ge_port Specifies the number of the GbE port to be displayed relative to the slot number. The GbE ports are numbered ge0 - ge9 on the Brocade FX8-24 blade and ge0 ge5 on the Brocade 7800 switch. The 10GbE ports on the Brocade FX8-24 blade are numbered xge0 and xge1. Use the switchShow command for a listing of valid ports Fabric OS Command Reference 797 53-1002746-01