Dell Brocade 6520 Command Reference Supporting Fabric OS v7.1.0 - Page 1087

topologyShow 2 NOTES OPERANDS EXAMPLES Total Bandwidth The maximum bandwidth of the out port. A bandwidth that is less than 0.512 Gbps is adjusted to the nearest power of 2 value. A bandwidth in the range of 0.512 Gbps (included) to 1 Gbps (not included) is adjusted to the 0.512 Gbps value. No adjustment takes place if the bandwidth is greater or equal to 1 Gbps. Bandwidth Demand The maximum bandwidth demand by the in ports. Flags Always D, indicating a dynamic path. A dynamic path is discovered automatically by the FSPF path selection protocol. The execution of this command is subject to Virtual Fabric or Admin Domain restrictions that may be in place. Refer to Chapter 1, "Using Fabric OS Commands" and Appendix A, "Command Availability" for details. The following operand is optional: domain Specify the destination domain for which to display the topology information. To display the topology on a single switch: domain is local, details are not displayed. switch:user> topologyshow 1 domains in the fabric; Local Domain ID: 97 When executed from an edge fabric, topologyshow displays details for all domains, including local domains and local translate domains: switch:user> topologyshow 6 domains in the fabric; Local Domain ID: 7 Domain: Metric: Name: Path Count: 1 10500 fcr_xd_1_1 1 Hops: Out Port: In Ports: Total Bandwidth: Bandwidth Demand: Flags: 2 11 0 1 2 3 4 5 6 7 8 9 15 8.000 Gbps 1275 % D Domain: Metric: Name: Path Count: 2 1000 fcr_fd_2 1 Hops: Out Port: In Ports: Total Bandwidth: Bandwidth Demand: Flags: 2 15 0 1 2 3 4 5 6 7 8 9 11 2.000 Gbps 4000 % D Domain: Metric: 3 10500 Fabric OS Command Reference 53-1002746-01 1059