Dell Brocade 6520 Command Reference Supporting Fabric OS v7.1.0 - Page 1074

2 tempShow tempShow Displays temperature readings. SYNOPSIS tempshow DESCRIPTION NOTES OPERANDS EXAMPLES SEE ALSO Use this command to display the current temperature readings of all temperature sensors in a switch. For each sensor, this command displays the sensor ID (an index number), the slot number (if applicable), the sensor state (OK or absent), and the temperature. The temperature readings are given in both Centigrade and Fahrenheit. The execution of this command is subject to Virtual Fabric or Admin Domain restrictions that may be in place. Refer to Chapter 1, "Using Fabric OS Commands" and Appendix A, "Command Availability" for details. Refer to the hardware reference manual for your switch to determine the normal temperature range. None To display temperature and status sensors: switch:user> tempshow Sensor Slot State Centigrade Fahrenheit ID 1 1 Ok 38 100 2 1 Ok 28 82 3 1 Ok 40 104 4 1 Ok 31 87 5 1 Ok 43 109 6 2 Ok 39 102 7 2 Ok 28 82 8 2 Ok 40 104 9 2 Ok 30 86 10 2 Ok 43 109 fanShow, psShow, sensorShow, slotShow 1046 Fabric OS Command Reference 53-1002746-01