Dell Brocade 6520 Command Reference Supporting Fabric OS v7.1.0 - Page 1061

syslogdFacility 2 syslogdFacility Sets or displays the syslog facility. SYNOPSIS syslogdFacility [-l level] DESCRIPTION NOTES OPERANDS EXAMPLES SEE ALSO Use this command to set the syslog facility to a specified log file, or use this command without operands to display the current syslog facility. The syslog daemon (syslogd) reads and forwards system messages to the log file specified by this command. You must configure the servers to receive system messages by adding them with the syslogdIpAdd command. The execution of this command is subject to Virtual Fabric or Admin Domain restrictions that may be in place. Refer to Chapter 1, "Using Fabric OS Commands" and Appendix A, "Command Availability" for details. This command has the following operands: -l level Specifies the syslog facility. Valid levels are 0 through 7. The default is 7. This operand is optional; if omitted, the current facility is displayed. 0 LOG_LOCAL0 1 LOG_LOCAL1 2 LOG_LOCAL2 3 LOG_LOCAL3 4 LOG_LOCAL4 5 LOG_LOCAL5 6 LOG_LOCAL6 7 LOG_LOCAL7 (default) To set the syslog facility to LOG_LOCAL1: switch:admin> syslogdfacility -l 1 Syslog facility changed to LOG_LOCAL1 To display the current setting: switch:admin> syslogdfacility LOG_LOCAL1 syslogdIpAdd, syslogdIpRemove, syslogdIpShow Fabric OS Command Reference 53-1002746-01 1033