Dell Brocade 6520 Command Reference Supporting Fabric OS v7.1.0 - Page 1066

2 sysMonitor NOTES OPERANDS If any configured area exceeds the currently effective threshold settings, the Fabric Watch daemon can take one or more of the following actions: • Send an SNMP message. • Log a RAS log message. • Send an E-mail alert (valid only for the environment and resource class). Fabric Watch thresholds vary depending on the class and platform. Refer to the Fabric Watch Administrator's Guide for defaults and configuration guidelines. The execution of this command is subject to Virtual Fabric or Admin Domain restrictions that may be in place. Refer to Chapter 1, "Using Fabric OS Commands" and Appendix A, "Command Availability" for details. This command requires a Fabric Watch license. This command has the following operands: class Specifies a Fabric Watch class to be monitored. This operand is optional with the --show option; it is required with all configuration options. Valid classes include the following: env Monitors the environment class. resource Monitors the resource class. -area area Specifies the area that can be configured for this class. This operand is optional with the --show option; it is required with all configuration options. Valid areas include the following: temp Specifies the temperature area for the environment class. This area is valid only with the environment class. flash Specifies the flash memory area for the resource class. This area is valid only with the resource class. --config class -area area Configures Fabric Watch thresholds for monitoring a specified class and area. When configuring Fabric Watch thresholds, you must specify a class and an area. The following operands are optional; if omitted, Fabric Watch uses default thresholds. -highthreshold -value value Specifies the high threshold for triggering a specified alert action. To change the default value, provide an integer value. -lowthreshold -value value Specifies the low threshold for triggering a specified alert action. To change the default value, provide an integer value. -trigger above | below Specifies the actions for in-range behavior. In range is defined as the space above the low threshold and below the high threshold for a given class and area. 1038 Fabric OS Command Reference 53-1002746-01