Dell Brocade 6520 Command Reference Supporting Fabric OS v7.1.0 - Page 1156

A Command Admin Domain and Virtual Fabrics restrictions Virtual Fabric commands are further constrained by one of the following switch types: - All Switches (All) = Command can be run in any switch context. - Base Switch (BS) = Command can be run only on the base switch. - Default Switch (DS) = Command can be run only on the default switch. - N/A = Switch type is not applicable to the command. - Chassis context (CH) = Command applies to the chassis on which it is executed. - Switch and Chassis context (VF/CH) = Command applies to the switch and the chassis. - Disallowed = Command cannot be executed when Virtual Fabrics are enabled. 5. Command-specific: Checks whether the command is supported on the platform for which it is targeted. NOTE To determine RBAC permissions for a specified command and associated major options,use the classConfig --showcli command. Refer to Chapter 1, "Using Fabric OS Commands" for more information. Command Admin Domain and Virtual Fabrics restrictions TABLE 1 Admin Domain and Virtual Fabric restrictions for Fabric OS commands. Command name Admin Domain Context aaaConfig ad ag agAutoMapBalance agShow aliAdd aliCreate aliDelete aliRemove aliShow appLoginHistory aptPolicy auditCfg auditDump authUtil bannerSet bannerShow bcastShow bladeCfgGemode bladeDisable bladeEnable SwitchMember Allowed/Phys Fabric only N/A/ Allowed/ SwitchMember N/A/ Allowed/ SwitchMember Allowed Allowed Allowed Allowed Allowed Allowed Allowed/ SwitchMember SwitchMember SwitchMember SwitchMember Allowed/ SwitchMember SwitchMember Allowed Allowed PortMember SwitchMember SwitchMember CH Disallowed VF VF VF VF VF VF VF VF VF VF CH CH VF VF VF VF CH CH CH Switch type N/A N/A All All All All All All All All All All N/A N/A All N/A N/A All N/A N/A N/A 1128 Fabric OS Command Reference 53-1002746-01