Dell Brocade 6520 Command Reference Supporting Fabric OS v7.1.0 - Page 448

2 fwPortDetailShow fwPortDetailShow Displays the port information for specified user ports. SYNOPSIS fwportdetailshow [--p port] | [--s portState] DESCRIPTION Use this command to print the overall status of a specified port. The output of this command is different for IPv4 and IPv6 addresses. The overall status is calculated based on the following contributors: Port Errors LFA The number of link loss occurrences exceeding the limit for the time period. LSY The number of sync loss occurrences exceeding the limit for the time period. LSI The number of signal loss occurrences exceeding the limit for the time period. PER The number of protocol errors exceeding the limit for the time period INW The number of invalid words exceeding the limit for the time period CRC The number of invalid CRC errors exceeding the limit for the time period PSC The port hardware state changed too often. BLP Buffer limited port SFP Errors STM The SFP temperature is out of range. SRX The SFP receive power is out of range. STX The SFP transmit power is out of range. SCU The SFP current is out of range. SVO The SFP voltage is out of range. Overall status Healthy Every contributor is healthy. Marginal One or more contributors are in this status. Faulty Faulty hardware. Offline The port has no connectivity or is disabled. If the overall status is not healthy, the contributing factors also are listed. 420 Fabric OS Command Reference 53-1002746-01