Dell Brocade 6520 Command Reference Supporting Fabric OS v7.1.0 - Page 45
zoneCreate, switchDisable, reboot, validate, Membership in an AD
View all Dell Brocade 6520 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 45 highlights
ad 2 -d "dev_list" Specifies the list of devices in an Admin Domain, in quotation marks. Separate each entry in the device list with a semicolon (;). Valid formats include the following: D,PI Uses existing zone D,PI member types. Benefits include the following: • Grants port control and zoning on the switch port and the devices attached to that port. • PI can be specified as a range; for example, D,[0 to 34]. The port index range is expanded and stored internally. • The same D,PI members can be specified in more than one Admin Domain. Device WWN Uses traditional zone WWN member types. Benefits include the following: • Supports node or port WWNs. • End-device members, whose WWNs are used in an Admin Domain definition, need not be online when the Admin Domain is created (similar to a zoneCreate operation). • Provides rights to zone the devices. • Provides administrative view rights to the switch port the device is connected to. -s "switch_list" Specifies the list of switches in an Admin Domain. The list must be enclosed in quotation marks. Separate each entry in the switch list with a semicolon (;). Specify the switch in one of the following formats: Switch WWN World wide name of the switch. Domain ID Any switch member specified in Domain ID format is converted into a switch WWN-based on the current fabric information. Operations with switch list fail if the domain ID to switch WWN lookup fails. Membership in an AD switch_list grants switch administrative operations such as switchDisable, switchEnable, reboot, ad, etc. on the switch. Ownership of a switch implicitly provides port control capability on all its ports, but no zoning control. "command_list" Specifies one or more commands to execute in an Admin Domain context. This operand is valid only with the --exec option. new_ad_id Specifies a new Admin Domain name or number. This operand is valid only with the --rename option. Format is the same as ad_id. -i Displays the implicit members of AD0. This operand is valid only with the --show option. -m mode Specifies the mode in which Admin Domain configuration information is displayed. This operand is valid only with --show and --validate. Valid values for mode include the following: 0 Displays the Admin Domain configuration in the current transaction buffer. Fabric OS Command Reference 17 53-1002746-01