Dell Brocade 6520 Command Reference Supporting Fabric OS v7.1.0 - Page 1084

2 thMonitor thMonitor Enables monitoring of small form-factor pluggables (SFPs). SYNOPSIS thmonitor --enable brcdsfp thmonitor --disable brcdsfp thmonitor --show DESCRIPTION NOTES OPERANDS EXAMPLES SEE ALSO Use this command to enable Fabric Watch threshold monitoring for 10G and 16G SFPs and for 16G QSFPs. Fabric Watch does not monitor 10G and 16G SFPs or 16G QSFPs unless monitoring is explicitly enabled with this command. This command requires a Fabric Watch license. The execution of this command is subject to Virtual Fabric or Admin Domain restrictions that may be in place. Refer to Chapter 1, "Using Fabric OS Commands" and Appendix A, "Command Availability" for details. This command has the following operands: --enable brcdsfp Enables Fabric Watch threshold monitoring for 10G and 16G SFPs and for 16G QSFPs. The feature is by default disabled. --disable brcdsfp Disables Fabric Watch threshold monitoring for 10G and 16G SFPs and for 16G QSFPs. --show Displays the current configuration. --help Displays the command usage. To enable Fabric Watch threshold monitoring for 10G and 16G SFPs and for 16G QSFPs. switch:admin> thmonitor --enable brcdsfp Brcd SFP Threshold Monitoring is enabled To display the configuration: switch:admin> thmonitor --show Brcd SFP Threshold Monitoring is enabled To disable Fabric Watch threshold monitoring for 10G and 16G FPs and for 16G QSFPs. switch:admin> thmonitor --disable brcdsfp Brcd SFP Threshold Monitoring is disabled thConfig, sfpShow 1056 Fabric OS Command Reference 53-1002746-01