Dell Brocade 6520 Command Reference Supporting Fabric OS v7.1.0 - Page 950

2 secPolicyDump secPolicyDump Displays the members of one or all existing security policies. SYNOPSIS secpolicydump ["listtype"][,"name"] DESCRIPTION NOTES OPERANDS EXAMPLES Use this command to display, without page breaks, the members of an existing policy in the active and defined (saved) databases. When issued without operands, this command displays the members of all security policies. The execution of this command is subject to Virtual Fabric or Admin Domain restrictions that may be in place. Refer to Chapter 1, "Using Fabric OS Commands" and Appendix A, "Command Availability" for details. This command can be issued from all FCS switches in the fabric. This command has the following optional operands: "listtype" Specifies the database to display, enclosed in double quotation marks. The name for an active database is "Active"; the name for a saved, defined database is "Defined". If listtype is not specified, all databases are displayed. "name" Specifies the security policy for which to display the members. Valid values for this operand include the following: • DCC_POLICY_nnn • FCS_POLICY • SCC_POLICY The specified policy name must be capitalized and enclosed in double quotation marks. The DCC_POLICY_nnn name has the common prefix DCC_POLICY_ followed by a string of user-defined characters. These characters do not have to be capitalize. If name is not specified, all existing policies are displayed. To display all security policy information from all databases without page breaks: switch:admin> secpolicydump ACTIVE POLICY SET FCS_POLICY Pos Primary WWN DId swName 1 Yes 10:00:00:60:69:30:15:5c 1 primaryfcs 2 No 10:00:00:60:69:30:1e:62 4 switch DEFINED POLICY SET FCS_POLICY Pos Primary WWN DId swName 1 Yes 10:00:00:60:69:30:15:5c 1 primaryfcs 2 No 10:00:00:60:69:30:1e:62 4 switch 922 Fabric OS Command Reference 53-1002746-01