Dell Brocade 6520 Command Reference Supporting Fabric OS v7.1.0 - Page 496
ipAddrShow, ipaddrset -ls 67 --delete, ipaddrset -ls 128 --add 10.32.72.70/24, ipaddrset -chassis
View all Dell Brocade 6520 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 496 highlights
2 ipAddrSet SEE ALSO Ethernet IP Address: 10.32.220.11 Ethernet Subnetmask: 255.255.240.0 Host Name: cp0 Gateway IP Address: 10.32.208.1 CP1 Ethernet IP Address: 10.32.220.12 Ethernet Subnetmask: 255.255.240.0 Host Name: cp1 Gateway IP Address: 10.32.208.1 IPFC address for logical fabric ID 128: 1.2.3.4/24 Backplane IP address of CP0 : 10.0.0.5 Backplane IP address of CP1 : 10.0.0.6 To delete the IPv4 address for the IPFC interface associated with a logical switch with Virtual Fabric ID 67: switch:admin> ipaddrset -ls 67 --delete IP address is being changed...Done. To configure an IPv4 FC address for the IPFC interface associated with a switch that is not in Virtual Fabric mode: switch:admin> ipaddrset -ls 128 --add 10.32.72.70/24 IP address is being changed...Done. To verify the changes: switch:admin> ipaddrshow SWITCH Ethernet IP Address: 10.32.72.9 Ethernet Subnetmask: 255.255.240.0 Gateway IP Address: 10.32.64.1 DHCP: Off IPFC address for virtual fabric ID 128: 10.32.72.70/24 To set the IPv4 address details for a switch chassis in interactive mode: switch:admin> ipaddrset -chassis Ethernet IP Address [192.168.166.148]: Ethernet Subnetmask [255.255.255.0]: Committing configuration...Done. To enable DHCP on a standalone, non-AP platform: switch:admin> ipaddrset Ethernet IP Address [192.168.74.102]: Ethernet Subnetmask [255.255.255.0]: Gateway IP Address [192.168.74.1]: DHCP [Off]: on To enable DHCPv6 on a device: switch:admin> ipaddrset -ipv6 -dhcpv6 ipAddrShow 468 Fabric OS Command Reference 53-1002746-01