Dell Brocade 6520 Command Reference Supporting Fabric OS v7.1.0 - Page 788

2 portLoginShow portLoginShow Displays port login status of devices attached to the specified port. SYNOPSIS portloginshow [slot/]port DESCRIPTION NOTES OPERANDS Use this command to display port login status received from devices attached to the specified port. For each login, this command displays the following fields: Type Type of login can display one of the following: fd FDISC, Discover F_Port Service Parameters or Virtual N_Port login. fe FLOGI, Fabric Login to Fabric F_Port. ff PLOGI, Port Login to specific N_Ports or well-known addresses like Name Server. PID The 24-bit Port ID of the attached device. WorldWideName The port's world wide name. credit The credit for this login as appropriate. This is BB (buffer-to-buffer) credit for Flogs and EE (end-to-end) credit for PLOGIs. df_sz The default frame size for this login. cos Class of Services supported. This can be a combination of the following bits: 4 Class 2 is supported. 8 Class 3 is supported. Further information about each login is displayed after these columns, including the Port ID of the well-known address or N_Port that was the target of the PLOGI, if applicable. The execution of this command is subject to Virtual Fabric or Admin Domain restrictions that may be in place. Refer to Chapter 1, "Using Fabric OS Commands" and Appendix A, "Command Availability" for details. This command is not applicable to embedded FCoE ports. Use fcoeLoginShow. This command has the following operands: slot For bladed systems only, specify the slot number of the port to be displayed, followed by a slash (/). port Specify the port for which to display login status information, relative to its slot for bladed systems. Use switchShow for a list of valid ports. 760 Fabric OS Command Reference 53-1002746-01