Dell Brocade 6520 Command Reference Supporting Fabric OS v7.1.0 - Page 891
portThConfig, e-port, fop-port, value 0.60, C3TX_TO
View all Dell Brocade 6520 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 891 highlights
portThConfig 2 NOTES OPERANDS The execution of this command is subject to Virtual Fabric or Admin Domain restrictions that may be in place. Refer to Chapter 1, "Using Fabric OS Commands" and Appendix A, "Command Availability" for details. This command requires a Fabric Watch license. For more information on port threshold configuration procedures, including default values for specific area high/low thresholds, refer to the Fabric Watch Administrator's Guide. This command has the following operands: port_type Specifies the port type for which to configure or display Fabric Watch settings. This operand is optional with the --show option. With all configuration options it is required. Valid port types include one of the following: e-port Configures or displays all E_Ports (not supported in Access Gateway mode). fop-port Configures or displays all optical F_Ports. fcu-port Configures or displays all copper F_Ports. This operand is supported only on embedded platforms and only on copper ports. port Configures or displays all physical ports. ve-port Configures or displays all VE_Ports. Only a subset of areas can be configured for this port type. When setting VE_Port thresholds for the packet loss area (PKTLOSS), the threshold value accepts up to two decimal points, for example, -value 0.60. The VE_Port type is not supported in Access Gateway mode. -area area Specifies the area monitored by the Fabric Watch daemon. This operand is optional with the --show option. With all configuration options it is required. The following areas are valid when configuring or displaying configuration settings on E_Ports, optical F_Ports, copper F_Ports, and physical ports. Area values are not case-sensitive. CRC Cyclic redundancy check error ITW Invalid transmission word C3TX_TO Class 3 transmit frames discarded due to timeout. LOS Loss of synchronization LF Link failure RX Receive error TX Transmit error PE Protocol error Fabric OS Command Reference 863 53-1002746-01