Dell Brocade 6520 Command Reference Supporting Fabric OS v7.1.0 - Page 1080

2 thConfig --show Displays the threshold configuration or run-time status for all configured classes and areas. You can optionally specify a class to display the threshold for all areas in that class. Or you can specify an a class and an area to display the area-specific configuration only. When issued without operands, this command displays all configured thresholds for all Fabric Watch classes. When issued with the -sfptype option on Condor 3 -based platforms, this command displays an additional column with SFP type. The following operands are optional and valid only with the --show option. -current Displays current values for a specified class and area, as registered by Fabric Watch, or for all port types and areas. The output includes the class, area, port number, circuit number if applicable, current value, Fabric Watch State, and Monitoring State (pause or continue). The SFP type is displayed for the SFP class. The State field reports whether the current value is above, in range, or below (info) the configured threshold. -area_only Displays areas of a specified class (Valid for FILTER class only). The following operands are optional with the --apply, --cancel, and --show options; if omitted, defaults are used. -thresh_level def | cust Configures or displays default or custom threshold configuration settings. -action_level def | cust Configures or displays default or custom configuration settings. --pause | --continue arguments Pauses or resumes monitoring. The following arguments are required: class Specifies the class. -area area[,area]... | all Specifies the area. You can either specify one or more areas separated by a comma, or you can specify all to indicate all areas. -port port_list |all Specifies one or more ports or all ports. The port_list operand supports one of the following values: • A single port number preceded by the slot number on bladed systems. • A set of comma-separated port numbers, preceded by the slot number on bladed systems, for example, 3,8,15, or 1/1,1/9,2/27. • A port range, for example 3-24 or 1/1-1/9. A port range cannot span slots. port ranges are supported only with the SFP, FILTER, and EE classes. -index index |all Specifies the index number for areas in the FABRIC and SECURITY classes (supported only with the FABRIC and SECURITY classes). --help Displays the command usage. 1052 Fabric OS Command Reference 53-1002746-01