Dell Brocade 6520 Command Reference Supporting Fabric OS v7.1.0 - Page 267

diagShow 2 diagShow Displays diagnostics status. SYNOPSIS diagshow [--slot number] [-uports itemlist] [-bports itemlist] [-use_bports value] DESCRIPTION NOTES OPERANDS EXAMPLES SEE ALSO Use this command to display the diagnostics status for the specified list of blade or user ports. On 10 Gbps and 16 Gbps (Condor3-based) platforms, the following output fields display invalid values, unless diagShow is executed while the spinFab or the portTest tests are running: "Speed", "FrTX", "FrRX", "LLI Errs", "Loopback", "Total Diag Frames Tx" and "Total Diag Frames Rx". The execution of this command is subject to Virtual Fabric or Admin Domain restrictions that may be in place. Refer to Chapter 1, "Using Fabric OS Commands" and Appendix A, "Command Availability" for details. This command has the following optional operands: --slot number Specify which slot to operate on. If this option is not specified, the default slot 0 is used. The default slot is designed to operate on fixed-port-count products. By default, this command displays information for all user ports in the system. -uports itemlist Specify a list of user ports. -bports itemlist Specify a list of blade ports. -use_bports value If this value is nonzero, this command displays the diagnostics status for the blade ports specified in -use_bports; otherwise, the command displays information for the user ports specified in -uports. The default value is 0. To display diagnostic status on a switch blade: switch:admin> diagshow Diagnostics Status: Fri Feb 08 15:25:24 2002 Slot: 1 UPORTS Port BPort Diag Active Speed ...... 0 15 OK UP 2G Auto ...... 1 14 OK UP 2G Auto ...... 2 13 OK UP 2G Auto ...... 3 12 OK UP 2G Auto ...... 4 31 OK UP 2G Auto ...... 5 30 OK UP 2G Auto ...... 6 29 OK UP 2G Auto ...... 7 28 OK UP 2G Auto ...... 8 47 OK UP 2G Auto ...... (output truncated) itemList Fabric OS Command Reference 239 53-1002746-01