Dell Brocade 6520 Command Reference Supporting Fabric OS v7.1.0 - Page 131
cfgAdd
View all Dell Brocade 6520 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 131 highlights
cfgAdd 2 cfgAdd Adds a member to a zone configuration. SYNOPSIS cfgadd "cfgName", "member[; member...]" DESCRIPTION NOTES OPERANDS EXAMPLES SEE ALSO Use this command to add one or more members to an existing zone configuration. This command changes the Defined Configuration. For the change to take effect, enable the configuration with the cfgEnable command. For the change to be preserved across switch reboots, save the configuration to nonvolatile memory with the cfgSave command. The execution of this command is subject to Virtual Fabric or Admin Domain restrictions that may be in place. Refer to Chapter 1, "Using Fabric OS Commands" and Appendix A, "Command Availability" for details. When an FCS policy is enabled, this command can be issued only from the primary FCS switch. The following operands are required: "cfgName" Specify a name for the zone configuration, enclosed in double quotation marks. "member" Specify a zone member or a list of zone members to be added to the configuration. The list must be enclosed in double quotation marks. Members must be separated by semicolons. To add two new zones to the configuration "Test_cfg": switch:admin> cfgadd "Test_cfg", "greenzone;bluezone" cfgClear, cfgCreate, cfgDelete, cfgDisable, cfgEnable, cfgRemove, cfgSave, cfgShow Fabric OS Command Reference 103 53-1002746-01