Dell Brocade 6520 Command Reference Supporting Fabric OS v7.1.0 - Page 688

2 portCfgCreditRecovery portCfgCreditRecovery Enables or disables credit recovery on a port. SYNOPSIS portcfgcreditrecovery --enable [slot/]port portcfgcreditrecovery --disable [slot/]port portcfgcreditrecovery --help [slot/]port DESCRIPTION NOTES OPERANDS EXAMPLES SEE ALSO Use this command to enable or disable credit recovery on a port. The credit recovery feature enables credits or frames to be recovered. The default credit recovery configuration is enabled. This command is supported in Access Gateway mode in Fabric OS v7.1.0 and later. The execution of this command is subject to Virtual Fabric or Admin Domain restrictions that may be in place. Refer to Chapter 1, "Using Fabric OS Commands" and Appendix A, "Command Availability" for details. The Fabric OS port configuration commands are not supported on FCoE ports. This command has the following operands: --disable Disables credit recovery configuration on the specified port. --enable Enables credit recovery configuration on the specified port. --help Displays the command usage. To enable credit recovery on a port: switch:admin> portcfgcreditrecovery --enable 3/15 To disable credit recovery on a port: portcfgcreditrecovery --disable 3/15 portCfgShow 660 Fabric OS Command Reference 53-1002746-01