Dell Brocade 6520 Command Reference Supporting Fabric OS v7.1.0 - Page 972

2 sfpShow EXAMPLES -f -all -health Green Yellow No License Unknown Paused Refreshes the SFP information. This option is valid only when sfpShow is issued for a specific port. Displays detailed data for all available SFPs on the switch. This operand is not compatible with slot/port operands. Displays SFP health status information from Fabric Watch for 10 Gbps and 16 Gbps SFPs and for 1 6Gbps QSFPs (Quad SFPs). When Fabric Watch monitoring of SFPs is enabled with the thMonitor command, Fabric Watch monitors diagnostic SFP parameters such as current, voltage, receiver power, transmit power, and temperature. When any of these parameters crosses user-configured low and high thresholds the SFP health state changes Possible health states include the following: SPF operates within Fabric Watch thresholds. At least one SFP parameter monitored by Fabric Watch has crossed a low or high threshold. The switch does not have a Fabric Watch License This state displays for 8 Gbps, 4 Gbps and 2 Gbps SPF types not supported by this feature. Health monitoring is not enabled on the switch. To display SFP information including SFP health parameters on a Brocade DCX 8510-8: switch:admin> sfpshow -health Slot 1/Port 0: id Slot 1/Port 1: id Slot 1/Port 2: id Slot 1/Port 3: id Slot 1/Port 4: id Slot 1/Port 5: id Slot 1/Port 6: id Slot 1/Port 7: id Slot 1/Port 8: id Slot 1/Port 9: id Slot 1/Port 10: id Slot 1/Port 11: id Slot 1/Port 12: id Slot 1/Port 13: id Slot 1/Port 14: id Slot 1/Port 15: id Slot 2/Port 0: id Slot 2/Port 1: id Slot 2/Port 2: id Slot 2/Port 3: id Slot 2/Port 4: id Slot 2/Port 5: id Slot 2/Port 6: id Slot 2/Port 7: id Slot 2/Port 8: id 944 Fabric OS Command Reference 53-1002746-01