Dell Brocade 6520 Command Reference Supporting Fabric OS v7.1.0 - Page 597

nsZoneMember 2 nsZoneMember Displays the information on online devices zoned with a specified device. SYNOPSIS nszonemember pid | wwn nszonemember -a | -n | -u nszonemember [-domain domain] [-index index] nszonemember --help DESCRIPTION Use this command to display information on all online devices zoned with the specified device. The device can be specified by WWN or Port ID (PID). Use this command with the -u option to display all unzoned devices in the entire fabric. Use the -a option to display online zoned device data for each local device. Use the -domain and -index options to display zoned device data for a device (either local or remote) in the fabric with the specified domain and port index combination. If a domain is not specified, device data for a local device with the specified port index is displayed. The command output displays the following information: Type U - known, N - N_Port, NL - NL_Port. Pid The 24-bit Fibre Channel address. COS A list of classes of service supported by the device. PortName The device's port world wide name (WWN). NodeName The device's node WWN. Permanent Port Name The physical N_Port or NL_Port WWN. DeviceType The device type. Port Index The index of the port to which the device is attached. Shared Area Whether or not the device shares an area with other devices. Device Shared in Other AD Whether or not the device is shared in other Admin Domains. Additional lines may display if the device has registered any of the following information (the switch automatically registers SCSI inquiry data for FCP target devices): • FC4 supported • IP address (node) • IPA • port and node symbolic name (local device only) • fabric port name • hard address or port IP address Fabric OS Command Reference 569 53-1002746-01