Dell Brocade 6520 Command Reference Supporting Fabric OS v7.1.0 - Page 1042

2 switchShow EX_Port Router port; displays the WWN of the attached edge switch. VF_Port FCoE Virtual F_Port. For these ports, the number of NPIV or external device logins is displayed ("n VN-Port(s)"), instead of the WWN of the internal port. VF_Port Disabled FCoE Virtual F_Port is disabled. Mirror Port The port is a mirror port. (Trunk master) The port is the master port in a group of trunking ports. (Trunk port, master is port #x) The port is configured as a trunking port; the master port is port #x. (upstream) The E_Port is an upstream path toward the principal switch of the fabric. (downstream) The E_Port is a downstream path away from the principal switch of the fabric. FICON Persistent DID This port has been disabled, because the switch could not obtain its configuration domain ID during the fabric reconfiguration when fmsmode was enabled. See the ficonCupSet help page for more information. Fabric ID conflict Two different fabrics have been assigned the same fabric ID. Applicable only to EX_Ports and Logical Fabric environments. Fabric ID oversubscribed One fabric has been assigned two different fabric IDs (EX_Ports only). AoQ Application-oriented QoS; indicates that an F_Port or N_Port has negotiated a link that is capable of quality of service (QoS). Both sides of the link have QoS capability and agreed on the protocol. The link could be between an HBA and an Access Gateway, between an Access Gateway and an edge switch, or between an HBA and an edge switch. LB mode If the Access Gateway cannot negotiate QoS capabilities with the edge switch, an HBA connected to the Access Gateway will not be able to negotiate a QoS link with the Access Gateway. (logical) A Server Application Optimization (SAO) license is required to enable QoS at the HBA. An Adaptive Networking license is required both at the Access Gateway and the edge switch to enable QoS. 1014 Fabric OS Command Reference 53-1002746-01