Dell Brocade 6520 Command Reference Supporting Fabric OS v7.1.0 - Page 1092

2 trackChangesSet trackChangesSet Configures the track-changes feature. SYNOPSIS trackchangesset [mode][,snmptrapmode] DESCRIPTION NOTES OPERANDS EXAMPLES SEE ALSO Use this command to enable or disable the track-changes feature and to configure the SNMP-TRAP mode. When enabled, this command tracks the following changes: • Successful login • Unsuccessful login • Logout • Enabling or disabling of the track-changes feature The output from the track-changes feature is dumped to the switch error log. Use errDump or errShow to view the error log. When used without operand, this command displays the usage. The execution of this command is subject to Virtual Fabric or Admin Domain restrictions that may be in place. Refer to Chapter 1, "Using Fabric OS Commands" and Appendix A, "Command Availability" for details. This command has the following operands: mode Specify 1 to enable the track-changes feature or specify 0 to disable the feature. Track-changes is disabled by default. snmptrapmode Specify 1 to enable sending messages to the SNMP-TRAP in addition to the error log. Specify 0 to disable the SNMP-TRAP messages. The SNMP-TRAP mode is disabled by default. This operand is optional; if omitted, this command disables the SNMP-TRAP mode. To enable the track-changes feature: switch:admin> trackchangesset 1,1 Committing configuration...done. To display the configuration: switch:admin> trackchangesshow Track changes status: ON Track changes generate SNMP-TRAP: YES trackChangesHelp, trackChangesShow 1064 Fabric OS Command Reference 53-1002746-01