Dell Brocade 6520 Command Reference Supporting Fabric OS v7.1.0 - Page 1056

2 switchStatusPolicyShow switchStatusPolicyShow Displays the policy parameters that determine the overall switch status. SYNOPSIS switchstatuspolicyshow DESCRIPTION NOTES OPERANDS EXAMPLES SEE ALSO Use this command to view the current policy parameters set for the switch. These policy parameters determine the number of failed or nonoperational units allowed for each contributor before triggering a status change in the switch. For port-related contributors, the numbers are expressed as a percentage of physical ports present in the switch at any given time. The command displays the current parameters in a three-column format. Refer to the Examples section for an illustration. The first column indicates the contributor, the second column indicates the minimum number that contributes to the DOWN status, and the third column indicates the minimum number that contributes to the MARGINAL status. The policy parameters are set by the switchStatusPolicySet command. Not all policies are supported on all platforms. Refer to the switchStatusPolicySet help page for more information. The execution of this command is subject to Virtual Fabric or Admin Domain restrictions that may be in place. Refer to Chapter 1, "Using Fabric OS Commands" and Appendix A, "Command Availability" for details. None To display the switch policy parameters Brocade DCX 8510-8: switch:admin> switchstatuspolicyshow The current overall switch status policy parameters: Down Marginal PowerSupplies 0 0 Temperatures 0 0 Fans 1 0 WWN 0 0 CP 0 0 Blade 0 0 CoreBlade 0 0 Flash 0 0 MarginalPorts 0.00%[0] 0.00%[0] FaultyPorts 0.00%[0] 0.00%[0] MissingSFPs 0.00%[0] 0.00%[0] ErrorPorts 0.00%[0] 0.00%[0] Number of ports: 4 fanShow, psShow, switchStatusPolicySet, switchStatusShow, tempShow 1028 Fabric OS Command Reference 53-1002746-01