Dell Brocade 6520 Command Reference Supporting Fabric OS v7.1.0 - Page 1041
The port supports Fibre Channel over Ethernet., F_Port receives 1 FDISK frame
View all Dell Brocade 6520 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 1041 highlights
switchShow 2 Online The port is up and running. Proto Protocol support by GbE port. Valid protocols include the following: ISCSI The port supports ISCSI (deprecated). FCIP The port supports FCIP. FCoE The port supports Fibre Channel over Ethernet. comment Optionally displays one of the following: Copper or Optical Displays which GbE port is currently active: Copper indicates that the RJ45 GbE port is currently active. Only copper connections are accepted (default). Optical indicates that the currently active GbE port accepts both copper and optical connections (SFPs). This parameter is set by the portCfgGeMediaType command, and applies only to the ge0 and ge1 ports on the Brocade 7800. Disabled The port is disabled. Port disable reasons may be stated in parenthesis: Disabled (FMS Mode) The port is disabled and in Ficon Server Management mode. Disabled (No area available for PID assignment) The port is disabled because a PID could not be assigned for the stated reason. Disabled (persistent) This port has been disabled with the portCfgPersistentDisable command. Disabled (Persistently disabled port) This port has been disabled for unspecified reasons. Bypassed The port is bypassed (loop only). Loopback The port is in loopback mode. D_Port Diagnostic port; D_Port feature can be configured on both E_Port and F_Port. D_Port on E_Port displays the world wide name (WWN) of the remote switch and D_Port on F_Port displays the world wide name (WWN) of remote port. E_Port Fabric port; displays the world wide name (WWN) and name of the attached switch. If the port is configured as an EX_Port, the WWN of the attached switch is the same as the router. F_Port Point-to-point port; displays the WWN of the attached N_Port. If that specific F_Port receives 1 FDISK frame, switchShow displays the total number of NPIV Public ports as 1, for example: F_Port 1 NPort + 1 NPIV devices. G_Port Point-to-point port, but not yet E_Port or F_Port. L_Port Loop port; displays the number of NL_Ports. Fabric OS Command Reference 53-1002746-01 1013