Dell Brocade 6520 Command Reference Supporting Fabric OS v7.1.0 - Page 573

msTdDisable 2 msTdDisable Disables the Management Server (MS) topology discovery service. SYNOPSIS mstddisable ["ALL"] DESCRIPTION NOTES OPERANDS EXAMPLES SEE ALSO Use this command to disable the management server topology discovery service on a local switch or an entire fabric. This change takes effect immediately and commits to the configuration database for all affected switches. The change is persistent across power cycles and reboots. Topology Discovery Management requires the attached devices (including attached switches) to support request node identification data (RNID) extended link service (ELS). When an FCS policy is enabled, and this command is issued with the "ALL" operand, it can be issued only from the primary FCS. The execution of this command is subject to Virtual Fabric or Admin Domain restrictions that may be in place. Refer to Chapter 1, "Using Fabric OS Commands" and Appendix A, "Command Availability" for details. This command is supported only in AD0 and AD255 contexts. The following operand is optional: "ALL" Disables the MS topology discovery service throughout the entire fabric. This operand must be enclosed in double quotation marks. To disable the MS topology discovery service on the local switch only: switch:admin> mstddisable This may erase all NID entries. Are you sure? (yes, y, no, n): [no] y Request to disable MS Topology Discovery Service in progress.... done. *MS Topology Discovery disabled locally. To disable MS topology discovery on all the switches in the fabric: primaryfcs:admin> mstddisable "ALL" This may erase all NID entries. Are you sure? (yes, y, no, n): [no] y Request to disable MS Topology Discovery Service in progress.... done. *MS Topology Discovery disabled locally. *MS Topology Discovery Disable Operation Complete!! msTdEnable, msTdReadConfig Fabric OS Command Reference 545 53-1002746-01